T103是一種油溶性防護劑，適用于任何天然石材及吸水性材料使用。本品能滲透進入石面，不會在表面形成薄膜，也不會改變石色，有效抵御污漬滲透，是石材防護理想用品。
適用范圍：用于光面、亞面，燒面等天然石材，水泥及一般磚材等。
使用方法：1. 直接用掃或布均勻?qū)103涂上無油、無蠟、無塵、無水份的石面，讓防護劑滲入石孔。
2．在處理面初干革命時（滲透時間視乎處理面的密度及天氣情況而定），用棉布沾少量的T103將剩余物抹去，以防止本品質(zhì)聚而形成斑點或污斑。
3．一小時后重復(fù)掃上T103可獲更佳效果，其覆蓋范圍8-10平方米/每公升/24小時后作全面性保護。
注意事項：1. 本品含有機溶劑，請勿長期吸入。
2．易燃，使用時切勿吸煙。切勿讓兒童接近。
3．建議使用時配戴手套，及在空氣流通處使用。
4．本品應(yīng)儲存于陰涼處，使用后必須把蓋合緊。
5．建議使用前先作試板，如效果滿意及沒有副作用，便可全面使用。
T103 is a type of solvent-base impregnator, especially formulated for absorptive natural stone. Its special molecular elements penetrate into the surface of natural stone protecting them from seepage's and from prejudicial action of external agents and extraneous substance. P38 works by impregnation and does not form any film on the surface, nor in any way alters the natural of the treated materials and it is ideal product to protect the sue surface of nature stone.
Materials:
Suitable for all types of stone surface such as polished, honed or flamed, cement and tiles etc.
Usage:
1. The surface to be treated must be dry, without dust and free from any kind of greasy substances. Apply the T103 by roller, sprayer and brush.
2. Depending on the environment conditions (temperature, air humidity ) the solvent evaporates in 10-15minutes. If the absorption is completed, the excess should be removed by another clean, dry and not dyed cotton rag, some hard and dried residue may remain on the surface (always on the polished surface )which can easily be removed by using a small quantity of T103.
3. For best protecting action, furher application, after one hour from the previous one, are suggested. Depending on the porosity of the materials applied, the coverage is about 8-10.-㎡/Litre. Complete protection is effective after 24 hours.
Notes:
1. Contain ethyl acetae, mineral turpentine, harmful for ingestion and long inhalation.
2. Inflammable, Keep far from flames and sparks, do not smoke. Keep out the reach of children!
3. Use in well-ventilated place and wear gloves where necessary.
4. Keep the container well closed and store it in a cool place.
5. Apreliminary test on a small part of the surface is suggested.
