 |
||||||
|
||||||
 |
||||||
GONTIN T400
Marble platform renewing and crystal plane nursing machine
220V-240V
2.5ps
9.6A 50HZ
Turntable rev 186r/min
Diameter of operation turntable :420mm
Weight:65kg
This machine is specially designed with stable and effective performance for marble grinding
and stone platform plane nursing widely applied to grinding and renewing of marble floor
,nursing of stone floor of hotel andRestaurant hall.
The marble renewing function with the capacity of 30㎡/12h ,allowing you to adapt water pad
ranging from 50#,500#,5# to 6# and grinding head solved the problem of wave surface occurred in
water pad grinding so as to give the stone floor renewed an ideal effect of flat mirror
surface.
Crystal plane nursing :T400,one of elite among machines alike,featuring handy operation,high
efficiency,low noise, and a capacity
larger than 100㎡/8h ,which lessens working internsity and raises crystal plane quality,this
machine is one of elite among stone crystal plane nursing machines.
T-400型石材打磨晶面處理機
新晶面護理兩用機
電壓：220V-240V
功率：2.5P
轉盤轉速:176r/min
頻率：50HZ
噪音：《35分貝
轉盤直徑:420mm
重量:65kg
本機型是專為云石打磨及石材地臺晶面護理而精心設計,廣泛應用于云石地面打磨翻新,及酒店、賓館大堂
石材地面的晶面護理，機械性能穩定，效果卓越。
云石翻新可使用水磨片從50#-500#-5#-6#打磨至真光。更可使用磨頭從36#-1200#拋光磨頭打磨至真光。
從根本上解決水磨片打磨所出現的波浪光面。另翻新石材地面出現平整鏡面的理想效果，12小時工作可打磨
30平方米以上。
晶面護理：T400型，晶面護理機械中之精英，本機型晶面護理操作輕盈，效率高，噪聲小，正常8小時工作可
處理晶面100平方米以上，直接減輕工作強度,提高晶面效果，是石材晶面護理機械中的精品。
